RTCA-DO-160G: Training on Environmental and EMI/EMC Testing of Airborne Equipment (FAA/EASA Test Requirements) | [Online/Live] [Global, EU CET Timezone] [250102G]
2.5 Days, Hands-on, “Online” or “Onsite” Training Class.
Led by live, two instructors.
January 15, 2025 @ 8:30 am – January 17, 2025 @ 12:30 pm UTC+1
Time Schedule: Central European Time (CET, UTC+1)
International Training with a focus on the test standard document
“RTCA-DO-160G Environmental Conditions
and Test Procedures for Airborne Equipment
© 2010, RTCA, Inc.”
This training is an important step for
testing and certifying your products in accordance with the FAA/EASA test requirements.
GDS Engineering R&D, Inc. is an official member of the RTCA Organization.
RTCA-DO-160G Online Training, FAA/EASA Equipment Test Requirements. This training is an important step for testing and certifying your products in accordance with the FAA/EASA test requirements.
Our Instructors share their experience and knowledge gained by working long years in the field with designing products and performing tests in accordance with such as RTCA-DO-160, MIL-STD-810, and MIL-STD-461. The slides are supported by many graphics and test videos for the efficiency and clarity of the information and each session is planned in accordance with the sections in RTCA-DO-160G.
Training Plan
- Training Type: International / Online
- Satus: Seats are avaiable.
- Online training using ZOOM.
- Led by a live, US-based instructor (Dr Ismail Cicek)
- 2.5 days of training schedule is as follows:
- Day 1: 08:30 – 11:30 | 12:30 – 16:30
- Day 2: 08:30 – 11:30 | 12:30 – 16:30
- Day 3: 08:30 – 12:00
- Time zone: Central European Time (CET) (UTC+1)
- Ending time may vary +/-30 minutes depending on the length of the discussions.
- Course Material: English (US), including presentations and additional reference material.
- Communications Language: English (US)
- Material: Registration includes all presentations and additional material (English) shared before the class.
- Attandance: The link for online class is distributed to registered trainees upon registration.
- Trainees will receive a Training Certificate.
- Training includes knowledge check quizzes, a competition-type fun way of learning
Summary Information
- A good understanding of product testing in view of RTCA-DO-160G
- Overview of Systems Engineering, V&V, and Concepts of Operations (CONOPS) document and relations with RTCA-DO-160 testing
- Part 21 and FAA/EASA Regulations
- Test Requirement Reference
- Test Category Selections
- Test Procedures, Scheduling, Test Implementation and Review of Test Reports
- Test Sections (Environmental & EMI/EMC): All test sections are covered with detail discussions except several tests, such as Fungus Tesing and Waterproofness are discussed in summary with important aspects.
- Discussions include design issues, test failures, and recommendations
- A session with Risk Management Method includes how to resolve a test result that may not be a failure, i.e. anomalies., with a process that we recommend.
- Importance of establishing Integrated Product Team (IPT) or with another name “Test Review Team” for reviewing test plans and results and identifying the next step when issues are encountered.
- Design Recommendations are emphasized in each test section.
- Additional or alternative (standards and tests) are recommended for certain cases.
About the Instructors
The main instructor of the training is Dr Ismail Cicek. He gained engineering and leadership experience by working for 15 years. He led the development of various platform engineering systems, including C-5, C-17, KC-10, KC-135, and C-130 E/H/J. Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft. An Avionics Chief Engineer (EE)and a Certified Verification Engineer (FAA/EASA) also assist with the training. Our experienced test personnel also become available for demonstrations and discussions. A Certified Verification Engineer (CVE) in FAA/EASA with 18 years of experience. He has worked as the chief engineer of avionics systems in product development. He is also experienced in product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.
Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.
Click here to read more about Dr Cicek’s professional studies. Connect with Dr Ismail Cicek on the Linkedin page.
Registration
We provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization, please get in touch with us.
To secure your spot in our training class, please send an email including your full name, your affiliated organization, contact information, and the name and date of the training you wish to attend. We look forward to having you!
| US Offices: | GDS Global Office (EU/TR): |
|---|---|
| Dayton, OH. | Mountainview, CA Ph. +1 (937) 912-1220 | ITU ARI Teknokent | GTU Teknopark Ph. +90 546 934 95 99 |
More Information and Contents of the Training
Click to read all the details about this training.